Pilz PNOZms2p HTL Manual do Utilizador descarregar pdf (Página 24)

6.2 Preparing for operation

6 Commissioning

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

6-2

6.2Preparing for operation6200Preparing for operation6-

6.2.1 Connection of proximity switches

Connection of proximity switches6-Drehzahlwaechter_Betriebsb_Naeherungssch_BA

Proceed as follows when connecting proximity switches:

 Terminals I10 and I11: connect the proximity switch for axis 1

 Terminals I20 and I21: connect the proximity switch for axis 2.

 If only one axis is to be monitored, either terminals I10 and I11 or ter-

minals I20 and I21 will remain free.

 When connecting incremental encoders and proximity switches on an

axis:

– Terminals I10: connect proximity switch for axis 1 (I11 is not used)

– Terminals I20: connect proximity switch for axis 2 (I21 is not used)

 The proximity switch must always be connected to a 0 V terminal of

the speed monitor. The 0 V terminals are connected internally.

 Connect proximity switch to 24 VDC of the power supply or the speed

monitor (the 24 V terminals of the speed monitor are connected inter-

nally)

Fig. 6-2: Connection to proximity switch

I20

I11

I21

I10

0 V

L+

L-

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 42 43

Sem comentários

Pilz PNOZms2p HTL Manual do Utilizador Página 24