Pilz PSENvip RL D P Manual do Utilizador descarregar pdf (Página 58)

4.6 Operating modes during commissioning

4 Function Description

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

4-30

4.6Operating modes during commissioning4600Operating modes during commissioning4-Funktion_Betriebsarten_Inbetriebnahme_Allg

The PSENvip has the following options for commissioning:

 Press brake setup mode

 Adjustment during initial commissioning

 Adjustment during tool change

Funktion_Betriebsarten_Inbetriebnahme_Allg_Biegewinkel

 Setting the parameters for bending angle measurement

4.6.1 Press brake setup mode

Press brake setup mode4-Funktion_Betriebsarten_Inbetriebnahme_Einrichten

Setup mode must be activated when work is to be carried out on the

press brake. The transmitter and receiver must be switched off. The dis-

play is switched on. By switching off the transmitter's light source the

tool setter has visual communication that there is no safety function via

the protected field. The OSSD LED on the receiver lights up red.

The input Power Off = 1 switches off the transmitter's light source.

4.6.2 Adjustment during initial commissioning

Adjustment during initial commissioning4-Funktion_Betriebsarten_Inbetriebnahme_Justage_Erstinbetriebnehme

The transmitter and receiver are aligned to each other during initial com-

missioning. The vertical and horizontal alignment is performed using

templates and is displayed on the receiver.

In this operating mode

 The protected field is inactive.

 The OSSDs are switched off.

 There is no protection via the PSENvip.

INFORMATION

Details of the adjustments made during initial commissioning are

described in Chapter 7, "Commissioning", section entitled "Ini-

tial commissioning".

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 156 157

Sem comentários

Pilz PSENvip RL D P Manual do Utilizador Página 58