Pilz PSENvip RL D P Manual do Utilizador descarregar pdf (Página 80)

6.2 Connections

6 Wiring

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

6-4

6.2Connections6200Connections6-

6.2.1 Receiver

Receiver6-Funktion_Geraete_Empfaenger_Stecker

The top of the receiver has two 8-pin M12 connectors.

Verdrahtung_Anschluss_Empfaenger

Fig. 6-2: M12 connector on the receiver

The receiver is connected via two 8-pin cables.

Fig. 6-3: Receiver's pin assignment

The cable ends of the Pilz ready-made cable are colour-coded. Please

refer to the tables below for the coding details.

Verdrahtung_Anschluss_Empfaenger_Basis

Pin assignment of M12 connector X1 on the receiver

PIn No. Designation Description Colour

1 Overrun measurement 1 Output, result of overrun measurement White

Tool class PSENvip -> PLC Bit 1

Output, sends tool class Bit 1 to safety system

2 24 VDC Input, 24 VDC supply voltage Brown

3 Protected field mode 1 Input, setting of protected field modes Green

Tool class PLC -> PSENvip Bit 1

Input, safety system reflects tool class Bit 1

4 Protected field mode 2 Input, setting of protected field modes Yellow

Tool class PLC -> PSENvip Bit 2

Input, safety system reflects tool class Bit 2

5 OSSD1 Output, OSSD1 Grey

6 Activate *) Output: Start communication with safety system Pink

7 0 V Input, 0 V supply voltage Blue

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 156 157

Sem comentários

Pilz PSENvip RL D P Manual do Utilizador Página 80